 |
| Product SKUs |
| |
| MBD-X7DVL-3-O |
- X7DVL-3 (Standard Retail Pack)
|
| MBD-X7DVL-3-B |
|
| |
| Physical Stats |
| |
| Form Factor |
|
| Dimensions |
- 12" x 10" (30.5cm x 25.4cm)
|
| |
| Processor/Cache |
| |
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz |
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| |
| System Memory |
| |
| Memory Capacity |
- Six 240-pin DIMM sockets
- Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- No Memory Mirroring support
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| On-Board Devices |
| |
| Chipset |
- Intel® 5000V (Blackford VS) chipset
- MCH + ESB2
|
| SAS |
- LSI 1068E PCI-E SAS Controller
- 8 SAS Ports supporting up to 8 SAS HDD
- RAID 0, 1, 10 support
|
| SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIMLC)
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
|
| Network Controllers |
- Two Intel® (ESB2/Gilgal) 82563EB Single-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
- XGI Volari™ Z7 PCI-E Graphics Processor
|
| Clock Generator |
|
| Super I/O |
|
| |
| Input / Output |
| |
| SAS |
- Eight SAS ports
- Eight SAS hard drives supported
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB Support
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers for up to 4-ports
- Total 6 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
| Parallel Port |
- 1 Header for ECP / EEP parallel port
| |
|
|
| Chassis ( Optimized for X7DVL-3 ) |
| |
| 1U Chassis |
- SC811T-520
- SC512F-520 (Mini 1U)
|
| 2U Chassis |
|
| Tower / 4U Rackmount |
|
| Mid-Tower |
|
| Important Chassis Notes |
- To ensure system stability, a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
| |
| Expansion Slots |
| |
| Universal Slot |
- 1x (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X Slot
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X slot
|
| PCI |
- 1x 32-bit 33MHz PCI (5V) slots
|
| |
| System BIOS |
| |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
| Management |
| |
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
| |
| PC Health Monitoring |
| |
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, ±12V
- 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
- Adjustable CPU Clock Frequency Ratio
|
| FAN |
- Total of six proprietary 4-pin fan headers supporting up to 6 fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
- Supsend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
| Operating Environment / Compliance |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10є to 35є C (50є to 95є F)
- Non-operating Temperature: -40є to 70є C (-40є to 158є F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | |
